Don't Do It: May 2023

Wednesday, May 31, 2023

S2 Dynamic Tracer And Decompiler For Gdb

Decompiling is very useful for understanding srtipped binaries, most dissasemblers like IDA or Hopper have a plugin for decompiling binaries, generating a c like pseudocode.

Static analysis, is very useful in most of cases, specially when the binary is not so big, or when you just have an address where to start to analyze. But some algorithms will be learned in less time by dynamic analysis like tracing or debugging.

In cookiemonsters team, we are working on several tracers with different focus, but all of them mix the concept of tracing and decompiling to generate human-readable traces.

S2 is my tracer & decompiler plugin for gdb, very useful for ctfs.

Some of the features are:

- signed/unsigned detecion
- conditional pseudocode (if)
- syscall resolution
- unroll bucles
- used registers values
- mem states
- strings
- logging

The code:

https://bitbucket.org/sha0coder/gdb_automatization/

fwd: personally reaching out

Making sure you saw Katie's email from Saturday. ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌

Hi, it's Lacey—Katie Porter's Campaign Manager!

I'm reaching out to make sure you saw Katie's email from Saturday. We close the books on our May fundraising at midnight tonight, and we need to enter June with as strong of fundraising numbers as possible.

We're polling ahead of the other Democrats in this race, but our fundraising is behind those who have accepted corporate PAC and federal lobbyist money.

Can you make a donation before midnight tonight to support our grassroots campaign?

https://secure.actblue.com/donate/kp4s-em-20230531-2?refcode=jambrose01.munchkinlegs@blogger.com

Thank you!

Lacey M.
Campaign Manager
(sent from my iPhone)

---------- Forwarded message ---------
From: Katie Porter (iPhone)
Date: Sat, May 27, 2023
Subject: personally reaching out

Hey, I hope you're enjoying the long weekend, so I'll keep this quick.

Our race is shaping up to be the most competitive and expensive primary of 2024. I'm running because special interests and big corporations have rigged the rules against families and working people. It's time to shake up the status quo and make real progress.

I'd be so honored to earn your support. Polling has us just pulling ahead, but another candidate still has a big cash advantage over us. Anything you can give today will help us build on this momentum and turn out voters.

https://secure.actblue.com/donate/kp4s-em-20230527-1?refcode=jambrose01.munchkinlegs@blogger.com

Thanks!

Katie Porter

Linux Command Line Hackery Series: Part 1

In this concise article we will learn some basics of how to use Linux Command line, so lets get started.

Requirements:

1. An open Terminal in your Linux Box. I'm using Kali Linux 2.0
or you can check out this amazing website Webminal

Command: ls
Syntax:    ls [flag(s)]
Function: ls is short for list. ls command is used to list the contents of a directory these contents include files, folders, and links. ls has many optional flags as well, some of them are described below
Flags: -a this flag is used to view hidden files that is those files whose names are preceded   by a '.'(dot)
-l this flag is used to view file permissions, owner of the file, group of the owner, the file size, the modification date, and the filename. We'll talk more about it in later articles.

Command: mkdir
Syntax:   mkdir dirname
Function: mkdir is used to create a directory (or a folder) with the name which is followed by the command

now lets create a directory in our current directory named as myfiles, how would you do that?

mkdir myfiles

which command should we use in order to verify that the directory has been created in our current folder?

ls

this will list all the files and directories in our current folder. Do you see myfiles directory listed?

Command: cd
Syntax:   cd path/to/directory
Function: cd is short for change directory. It is used to navigate directories, or to make it clear it does the same thing as what double clicking on a folder do except it doesn't show you contents of the directory :(. In order to navigate or visit another directory we need to provide it's ABSOLUTE-PATH or RELATIVE-PATH you heard that, didn't ya?

Paths are of two types relative path or absolute path (also called full-path). Relative as the name suggests is relative to the current directory, so if you have to navigate to a folder within the current directory you'll just simply type cd directory_name. But what if you have to navigate to a directory which is the parent of current directory? Well it's easy just type cd .. (yes double dots, you noticed that .. and . thing when you typed ls -a, didn't you?). The double dots mean the directory above current directory (i,e the parent directory) and a single dot means the current directory (i,e the directory that I'm currently in). Now if you have to navigate two directories above current directory using relative path navigation you'll type

cd ../..

here .. means previous directory and another .. after slash (/) means the previous directory of the previous directory sounds confusing..!

The Absolute Path means full path to the file or folder which starts from root directory. Say I want to navigate to my home folder using absolute path, then I'll type:

cd /home/user

where user is the username
Now think of navigating to the myfiles folder from your home directory using the absolute path, it will be something like this:

cd /home/user/myfiles

Exercise: Create a directory project1 inside your home directory and inside the project1 directory create a file and a directory named index.html and css respectively. Then navigate to the css directory and create a style.css file inside it. At last navigate out of the css directory to home both using the relative and absolute path mechanisms.

[Trick: To get quickly out of any directory to your home directory type cd ~ [press Enter] or simply cd [press Enter]]

Command: touch
Syntax: touch filename
Function: touch is a nifty little function used to create an empty file (actually it's used to change access time of a file but everyone has got bad habits :P ). You can create any type of empty file with the touch command. If you are a bit curious about touch read the manual page of the touch command using the man touch command.

Now lets create a few files inside of our myfiles directory

touch file1 file2 file3

The above command creates three empty files in our current directory named file1, file2, and file3.
How will you verify that it has indeed created these three files in your current directory? I won't answer this time.

Command: echo
Syntax: echo Hacker manufacturing under process
Function: echo is used to display a line of text. By default echo displays a line of text on the terminal which is the standard output device (stdout for short). However we can redirect the output of an echo command to a file using > (the greater than symbol).
Now if we have to echo a line of text to a file, say file1 in our myfiles directory, we will type:

echo This is file1 > file1

The above command will echo the text "This is file1" to file1.

Command: cat
Syntax: cat filename [anotherfilename...]
Function: cat stands for concatenate (not that puny little creature in your house). The main function of cat is to concatenate files and display them on your terminal (or in geeky terms stdout). But its also used to display the contents of a file on your terminal.

Let's display the contents of file1 in the myfiles directory that we echoed to it using the echo command, for that we'll type:

cat file1

Awesome I can see on black screen contents of my file (what if your terminals background is white?), looks like I'm becoming a hacker. In case you don't see it then I suggest you should give up the thought of becoming a hacker. Just kidding you might have missed a step or two from the above steps that we performed.

Now lets say that we want to add another line of text to our file using the echo command should we use the same greater than (>) symbol? No, if we want to add another line (which in geeky terms is to append a line) to our file using the echo command we have to use >> (two greater than symbols) like this:

echo Another line of text >> file1

now to check the contents of file1 we'll type:

cat file1

OK we wrote two lines inside of the file1.
Does it mean we have to add three greater than symbols to write third line? Oh! I didn't thought you'd be such a genius.

A single greater than symbol (>) means redirect the output of the preceding command to a file specified after the > symbol. If the file exists then overwrite everything that's in it with the new contents and if the file does not exist then create one and write to it the output of the preceding command. So if you had typed

echo Another line of text > file1

it would have overwritten the contents of the file1 with "Another line of text" and the line "This is file1" would no longer be present in the file.

Two greater than symbols (>>) mean that append (remember the geeky term?) the output of the previous command to the end of file specified after >>. Now if you want to add another line of text to file1, you won't use >>> rather you'll use >> like this:

echo Third line in file1 >> file1

This is it for today. But don't worry we'll learn more things soon.

Continue reading

$30.56

Our average donation is just $30.56 ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌ ‌

Katie is running for the U.S. Senate because Californians deserve a warrior fighting for them in Washington. Our campaign is people-powered, we don't take a dime from corporate PACs, federal lobbyists, or executives from Big Oil or Big Pharma.

Donate ›››

This email was sent to jambrose01.munchkinlegs@blogger.com. Email is a critical way we communicate with grassroots supporters like you. However, if you would like to change your subscription preferences, here are some options:

To give by check:
Katie Porter for Senate
PO Box 5176
Irvine, CA 92616

Email us: info@katieporter.com

Paid for by Katie Porter for Senate

1516 hash passwords

Don't Do It